All chain users aim at minimising lubricant consumption volumes to enhance their profitability. At the same time, they expect good wear protection and low residue formation to keep maintenance costs low.

Our synthetic ester oils clearly meet these requirements. With our Klübersynth CH 2 series, we have found the right solution for you.

Benefits for your application

• Synthetic ester oil for low continuous relubrication quantities at high temperatures up to 250 °C
• Good wear protection results in extended chain life even at temperatures above 200 °C
• Clean chains and easy relubrication due to low residue formation
• No mechanical cleaning of chains required
• Low energy consumption due to low chain friction and good lubricant film formation
• Paint-compatible raw materials to avoid paint defects and reworking

The post klubersynth CH 2-100 N appeared first on BANGKOK VALVE CO.,LTD..

Klüberquiet BQH 72-102 is a synthetic high-temperature lubricating grease. Due to the careful selection of product components and the clean manufacturing environment, Klüberquiet BQH 72-102 is a rolling bearing grease with a particularly low noise level. Klüberquiet BQH 72-102 offers excellent performance characteristics thanks to a high-quality ester oil, a new polyurea thickener and special additives. It is special in that it combines high-temperature resistance and extreme purity.

Benefits for your application

• Cost savings due to long service life of grease at > 80°C
• Smooth running, low noise
• Wide service temperature range allows a variety of applications
• Long bearing life due to excellent water resistance

The post kluberquiet BQH 72-102 appeared first on BANGKOK VALVE CO.,LTD..

Klüber Summit T.A.N.-Kit consists of a pipette (1 ml), a glass vial containing the test fluid and a cloth, all packed in a plastic bag.

Benefits for your application

• Rapid way of checking the condition (neutralization number) of compressor oils on the spot
• Suitable for determining the compressor oil change intervals
• Easy handling and determination of the neutralization number thanks to the simple set-up according to instructions enclosed
• Can be used for all conventional mineral and synthetic compressor oils

The post klueber summit T.A.N-Kit appeared first on BANGKOK VALVE CO.,LTD..

Due to its sufficiently high viscosity matching the gear oil, Klüber Summit Varnasolv HV can be added to the oil to clean gears during operation. Klüber Summit Varnasolv HV is a fluid cleaning concentrate designed to dissolve sticky residues, varnish and carbon build-up during operation and keep them suspended in the oil. At the end of the cleaning process, the used oil is drained to flush out the unwanted residues and fresh, clean oil is applied.

Benefits for your application

• Low costs for maintenance and cleaning due to effective deposit removal
• High viscosity formulation matching gearbox operational requirements in wind turbines
• No gearbox downtime required for cleaning as product is used during normal turbine operation
• Klüber Summit Varnasolv HV is neutral towards seals if the maximum recommended concentration of 10 % is not exceeded
• Cost-saving operation and maintenance of the cleaned gearbox due to longer oil life

The post kluber summit varnasolv appeared first on BANGKOK VALVE CO.,LTD..

Klüber Summit PS oils are air compressor oils based on hydrogenated mineral oil, synthetic ester oil and additives. Klüber Summit PS oils are miscible with mineral oils and synthetic hydrocarbons, but not with oils based on polyglycol.

Benefits for your application

• Low maintenance and operating costs due to oil change intervals up to 5,000 operating hours in
  oil-injected screw-type compressors
• Easier compressor oil changeover due to neutral behaviour of oils towards seals
• Good soil dissolving capacity, clean oil circuit due to the ester content in the oil, reduction of cleaning costs
• Low formation of oxidation residues in the oil circuit, reduced operating costs due to extended oil filter and separator life

The post kluber summit PS 400 appeared first on BANGKOK VALVE CO.,LTD..

Klüberoil 4 UH1 N is a synthetic high-performance gear and multipurpose oil based on polyalphaolefin satisfying the growing requirements and increasing power density of modern gears. Klüberoil 4 UH1 N is based on high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.

Klüberoil 4 UH1 N is registered as NSF H1 for use in the food-processing and pharmaceutical industries and complies with FDA 21 CFR Sec 178.3570. It was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberoil 4 UH1 N can contribute to increase reliability of your production processes. Nevertheless it is recommended to conduct an additional risk analysis, e.g. HACCP.

Klüberoil 4 UH1 N is certified according to ISO 21469, thus supporting compliance with hygienic requirements of your production. You will find further information about ISO Standard 21469 on our website www.klueber.com.

Klüberoil 4 UH1 N from ISO VG 68 to 680 clearly exceeds CLP requirements according to DIN 51517-3. Corresponding gears can be switched to Klüberoil 4 UH1 N without prior consultation provided the general application notes are observed.

Gears are sufficiently protected against scuffing even at extremely high peak loads, vibrations or oscillations, or if no running-in was performed. The good wear protection of both gears and rolling bearings ensures that the service life calculated for the lubricated components is achieved, leading to lower maintenance and repair costs.

Klüberoil 4 UH1 N offers a much longer service life than mineral and white oils due to the excellent ageing and oxidation resistance of the selected raw materials; thus service intervals can be extended and maintenance costs reduced. In certain applications, even lifetime lubrication is possible. The product’s low foaming tendency and anti-corrosive properties enable problem-free gear operation. Oil leakage leading to contamination is prevented due to the good compatibility with elastomers.

The good viscosity-temperature behaviour supports the formation of a sufficient lubricant film across a wide service temperature range, even at elevated and high temperatures. Therefore, a single viscosity grade can cover both low and high temperatures in many applications.

The optimised friction behaviour enabled by the carefully selected base oils reduces power loss and improves gear efficiency.

Klüberoil 4 UH1 N is approved by SEW Eurodrive, Getriebebau Nord, Stöber Antriebstechnik, Lenze, Sumitomo, Bonfiglioli, Brevini, STM, Watt Drive, etc.

By using Klüberoil 4 UH1 N you can benefit from a number of advantages that will help you save costs easily and efficiently. We look forward to hearing from you.

Benefits for your application

• Registered as NSF H1 and certified according to ISO 21469
• High scuffing protection
• Good wear protection for gears and rolling bearings
• Good shear stability for reliable lubricant film formation
• Excellent ageing and oxidation resistance
• Wide service temperature range due to good viscosity-temperature behaviour
• Low foaming tendency
• Energy savings due to optimised friction behaviour
• Good elastomer compatibility
• Approved by numerous gear OEMs

The post kluberoil 4 UH1-100 N…220 N appeared first on BANGKOK VALVE CO.,LTD..

Klüber Summit SH oils are air compressor oils based on synthetic hydrocarbon and additives. They can be mixed with mineral oils and synthetic hydrocarbon oils, however are not miscible with polyglycol oils.

Benefits for your application

• Low maintenance and operating costs due to extended oil change intervals up to 10,000 operating hours in oil-injected screw-type compressors
• Easy compressor oil conversion due to neutral behaviour of oils towards seals
• Low tendency to evaporation and thus low impact of the oil vapour on the compressed air
• Longer servie life of the oil filters, activated carbon filters and oil separators
• Low formation of oxidation residues in the oil circuit, reduced operating costs due to extended oil filter and separator life

The post kluber summit SH 68 appeared first on BANGKOK VALVE CO.,LTD..

Klüber Summit HySyn FG oils are air compressor oils based on synthetic hydrocarbon oils. They can be mixed with mineral oils and other synthetic hydrocarbon oils.

Klüber Summit HySyn FG oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators.

Klüber Summit HySyn FG oils are NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüber Summit HySyn FG oils can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Benefits for your application

• Klüber Summit HySyn FG oils are NSF H1 registered for use in the food-processing and pharmaceutical industry and comply with FDA 21 CFR Sec 178.3570
• ISO 21469 certified – supports compliance with the hygienic requirements of your production. You will find further information about ISO Standard 21469 on our website www.klueber.com
• Low maintenance and operating costs due to extended oil change intervals up to 4,000 operating hours in oil-injected screw-type compressors
• Easy compressor conversion from mineral to the synthetic Klüber Summit HySyn FG oils due to miscibility and compatibility with common seal materials
• Low tendency to evaporation and thus low impact of the oil vapour on the compressed air
• Long service of oils filters, activated carbon filters and oil separators
• Also suitable for the lubrication of gears due to the high scuffing load capacity
• Used and approved by Aerzener, Air Liquide, Boge, CompAir, Worthington, Getriebebau Nord, Lenze etc.

The post kluber summit hysyn FG 68 appeared first on BANGKOK VALVE CO.,LTD..

Klüber Summit SH oils are air compressor oils based on synthetic hydrocarbon and additives. They can be mixed with mineral oils and synthetic hydrocarbon oils, however are not miscible with polyglycol oils.

The post kluber summit ultima 46…..68 appeared first on BANGKOK VALVE CO.,LTD..

The post kluber summit SH 32….68 appeared first on BANGKOK VALVE CO.,LTD..