At a glance: lubricating greases from Klüber Lubrication

• Excellent solutions for mechanical friction: effective and sustained protection against wear, corrosion and risks from external factors.
• Proven track record for individual requirements:applications for our reliable speciality lubricants include valves and fittings, rolling and plain bearings, gears, plastics, contacts, pneumaticcomponents and many more.
• High-quality solutions from the world market leader: competence and expertise based on more than 90 years of research and experience.

What are industrial lubricating greases?

Lubricating greases, when carefully chosen, are effective in industrial applications at reducing mechanical friction and wear. From a purely chemical perspective, they are mixtures consisting of

• approximately 75 percent lubricating oil;
• approximately 15 percent thickener;
• and up to 10 percent additives.

Lubricating greases are the ideal choice when you want to provide long-term protection for friction points. Along with excellent lubrication, they provide effective protection against external factors such as water spray, humidity and contaminants, depending on the operating conditions.

The result: Your machines are protected against wear and corrosion. This keeps you on the safe side, both mechanically and economically.

Strong adhesion through consistent lubricants

The question of whether grease or oil lubrication would be the better choice for your application depends on your individual requirements. By choosing the right lubricant you can master existing challenges. In all cases, what matters is the design and mode of operation of your machine.

An advantage of grease lubrication over oil lubrication is that the lubricant is consistent and therefore stays longer at the friction point. This is especially beneficial with lubrication points

• that are not sealed and where the base oil is held at the friction point by the consistency of the lubricating grease, which enables an optimal supply of the base oil to the friction point;
• when relubrication is not possible, meaning that a single lubricant fill has to provide lubricity over the component’s entire lifetime.

Basically, grease lubrication is the most obvious choice when the design of an industrial application rules out the use of oil lubrication. An example of grease applications is spindle bearings in machine tools, which rotate very fast and have low surface pressure. For large drives with high surface pressures and low speed, by contrast, lubrication with oils or fluids may be more appropriate.

The advantages of grease lubrication:

• Simpler design with respect to sealing
• Long service life with reduced maintenance effort
• Often a lifetime lubrication
• Lower consumption
• Improved sealing

Optimal grease lubrication: the right lubricating grease for your individual needs

You should select a suitable lubricating grease for the applications you want to optimise and protect. Our product range includes more than 1,500 different lubricating greases to precisely match your individual needs. Boost your production to a new level – for example, with high-performance lubricating greases for unusually high or low temperatures, or especially versatile lubricating greases.

• Lubricating greases for rolling bearings and plain bearings

Suitable grease lubrication is indispensable for reliable operation and service life attainment of rolling bearings. For example, good oil release is especially important for high-speed rolling bearings. For each application, you need a suitable lubricant that meets your individual demands. You can choose from high-temperature, low-temperature, high-speed or heavy-duty lubricating greases, as well as H1 lubricating greases.

The post Lubricating greases: sustainably resolving wear and corrosion with the optimal grease choice appeared first on BANGKOK VALVE CO.,LTD..

The post สารหล่อลื่นเกรดพิเศษ สำหรับอุตสาหกรรมอาหารและเครื่องดื่ม appeared first on BANGKOK VALVE CO.,LTD..

The post น้ำมันและจาระบีเกรดพิเศษของ appeared first on BANGKOK VALVE CO.,LTD..

The post สารหล่อลื่นเกรดพิเศษ สำหรับทุกอุตสาหกรรม appeared first on BANGKOK VALVE CO.,LTD..

High-quality lubricating oils have a good wetting ability and spread easily across the components. Their good viscosity-temperature behaviour ensures that the oil film viscosity is maintained, making them a good choice for high speeds and high temperature applications. Many of our lubricating oils also remove heat, contaminating particles and residues from the friction points, allowing continuous cooling, cleaning and lubrication.

By choosing an oil from our comprehensive product range, you benefit from all these advantages. We offer high-performance oils in a wide range of viscosities for different material combinations, applications and industries. Examples include gears, chains, compressors, machine tools and in industries such as automotive, chemicals and pharmaceuticals. We work closely with manufacturers of components and machines and operators to develop individual solutions. Our speciality lubricants are tested in our comprehensive test labs to ensure they work as you expect as soon as you receive them.

Chain oils for high requirements

Chain drives must function reliably under tough operating conditions: humidity, media influence, high, low or fluctuating temperatures. You expect the oil to penetrate the chain links and to ensure reliable lubrication. Our speciality lubricants increase the lifetime of your chains even at high temperatures and thus reduce your maintenance costs.

You may find the following chain oils worth considering:
Klübersynth CH 2-100 N
Klübersynth CHM 2-220
STRUCTOVIS HD series
Klüberfood NH1 CH 2-220 Spray

You will find further Information on our chains website.

Compressor oils – suited to your requirements

Compressors are expected to function for long service intervals without maintenance. It is essential to select the right lubricating oil for the compressed medium, which can be air, process gas or a refrigerant. Our Klüber Summit product range is proven for compressors of all types. They minimise wear and extend service intervals for higher compressor availability. Klüber Tyreno fluids are proven effective for the evacuation of gases, for example with vacuum pumps. 

The following lubricating oils are particularly suitable for compressors:
Klüber Summit FG series (screw and piston compressors) 
Klüber Summit SH series (screw compressors)
Klüber Summit DSL series (vane compressors)

Our oil range for vacuum pumps includes the following product:
Klüber Tyreno-Fluid M100V

Our compressor page tells you more about our solutions for compressors.

Solid lubricant suspensions for high temperatures

Solid lubricant suspensions like Klüberplus S 01-004 are the ideal solution for components and machines subject to high temperatures. They combine excellent wetting ability, good corrosion protection and high stability to ensure that the solid lubricants conveyed by the carrier oil provide effective wear protection of your components at high temperatures. Solid lubricant suspensions facilitate reliable lubrication for extended periods. They can be used for drive and control chains in melting furnaces, plate carrier chains in baking ovens or as die-casting release agent for copper alloys.

The post Lubricating oils appeared first on BANGKOK VALVE CO.,LTD..